面向工程化应用的量子阱红外探测材料制备研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Fabrication of QWIP material for mass production
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了得到高性能的量子阱红外探测材料,本文通过建立系统的材料设计、材料生长及材料表征体系,对面向工程化应用要求的单色以及双色红外探测的量子阱材料制备技术进行了较深入探索,并得到了相应部分器件的测试结果,实践证明,通过工艺与控制过程优化,量子阱红外探测材料的制备可实现高的可控性和稳定性。

    Abstract:

    In the past few years researchers have made impressive progress in Ⅲ-Ⅴ based low dimension infrared detector such as QWIP,QDIP and Sb based superlattice.QWIP technology has been proved an important candidate for the third generation IR systems for its high uniformity,yield,large fomat and muti-band capability in Europe and American,but is still in the Lab in China.So these kinds of production are important issues to be developed.The design and fabrication of high performance QWIP material is the first thing to be solved.How to keep a high quality,high yield,and high efficiency material growth is the basement of the whole project.Since 2007 we start our research in QWIP material.And much progress has been achieved with the foundation of the material design,growth and characterization.In this paper we present some recent results of our research in single color and two color QWIP material.As a result,highly controllable and stable material can be guaranteed by the optimization of process control.

    参考文献
    相似文献
    引证文献
引用本文

杜鹏,周立庆.面向工程化应用的量子阱红外探测材料制备研究[J].激光与红外,2010,40(11):1215~1219
DU Peng, ZHOU Li-qing. Fabrication of QWIP material for mass production[J]. LASER & INFRARED,2010,40(11):1215~1219

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: