大功率激光器驱动电源的闭环控制与补偿
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Closed-loop control and compensation of high-power laser driving power supply
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用状态空间平均法为大功率激光器恒流驱动电源的移相全桥倍流整流电路建立了等效的小信号模型,在此基础上研究了其闭环控制系统,并使用集成控制芯片UCC28950设计了为实际生产所需要的控制电路。应用自动控制原理和Matlab工具设计了闭环系统的补偿网络,使得该恒流电源具有良好的瞬时动态特性和抗干扰性。

    Abstract:

    For phase-shifted full bridge current-doubler rectifier circuit of high-power laser constant current drive power,small signal equivalent model is established by state space average method. Based on this,the closed-loop control system was studied. The integrated control chip UCC28950 was used to the actual control circuit. According to automatic control principle,the compensation network of the closed-loop control system was designed by Matlab,which makes the constant current supply has good transient dynamic characteristics an anti-interference.

    参考文献
    相似文献
    引证文献
引用本文

杨克成,刘舒书,杨爱武.大功率激光器驱动电源的闭环控制与补偿[J].激光与红外,2016,46(1):85~91
YANG Ke-cheng, LIU Shu-shu, YANG Ai-wu. Closed-loop control and compensation of high-power laser driving power supply[J]. LASER & INFRARED,2016,46(1):85~91

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-01-20
  • 出版日期: