基于REC技术的可调谐激光器模块
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

江苏省六大人才高峰计划(No.DZXX-023);江苏省产学研联合创新资金-前瞻性联合研究项目(No.BY2014023-11)资助


Tunable laser module based on REC technology
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过重构-等效啁啾(REC)技术实现了一种基于分布式反馈(DFB)激光器矩阵的低成本可调谐激光器模块,对该模块进行了波长调谐、稳定性以及其他性能的测试,并将特定波长的参数加以标定。模块中的相邻激光器之间的中心波长间隔均匀等距且P-I特性良好,可调谐激光器输出波长的波动小于±3 pm,光功率变化小于0.02 dBm。波长调谐范围为1536.64~1559.36 nm,在该范围内依照ITU-T的DWDM标准涵盖了60特定波长通道,通道切换时间为5~30 s。

    Abstract:

    A low cost tunable laser module based on distributed-feedback (DFB) laser matrix is achieved by reconstruction-equivalent-chirp (REC) technology. Wavelength tuning,stability and other performance tests are applied,and the parameters of specific wavelength are calibrated. The wavelength spacing between adjacent lasers in the module is uniform,and the P-I diagrams are good. The output light of this tunable laser has a wavelength fluctuation within ±3 pm and a power fluctuation less than 0.02 dBm. The wavelength-tuning range is 1536.64~1559.36 nm,which can covers 60 specific wavelength channels according to ITU-T DWDM standard,and the channel-switching time is 5~30 s.

    参考文献
    相似文献
    引证文献
引用本文

刘森,倪屹,曹宝丽,曾盼.基于REC技术的可调谐激光器模块[J].激光与红外,2016,46(3):289~293
LIU Sen, NI Yi, CAO Bao-li, ZENG Pan. Tunable laser module based on REC technology[J]. LASER & INFRARED,2016,46(3):289~293

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-03-22
  • 出版日期: