In order to measure the emissivity of the mixed surface,a series array as emissivity samples are designed,which are deep continuous gradient cavity array and divided into 5 units.The series of emissivity is obtained by using infrared thermal imager to capture thermal images at the upper end of the emissivity sample.The emissivity is obtained by theoretical calculation.Through the experimental measurement of the surface emissivity of the unit,the theoretical calculation and experimental measurements are compared,the influence of deep continuous tapered cavity array on the surface emissivity at different heating temperatures is discussed.The results show that with the increase of heating temperature,the surface emissivity of the deep continuous tapered cavity array will decrease;with the increase of cavity depth,the surface emissivity of the deep continuous tapered cavity array will increase.
参考文献
相似文献
引证文献
引用本文
王潇楠,李文军,李佳琪,郑永军.深度连续渐变式空腔阵列表面发射率研究[J].激光与红外,2018,48(11):1386~1390 WANG Xiao-nan, LI Wen-jun, LI Jia-qi, ZHENG Yong-jun. Research on surface emissivity of depth continuous gradient cavity array[J]. LASER & INFRARED,2018,48(11):1386~1390