With ring cavity configuration,it was realized for the continuous and Q-switched function of 1063 nm double-clab Yb3+-doped fiber laser.The experimental results of continuous laser showed that the gain fiber has an optimal output fiber length with the pump power and transmissivity are fixed and laser power output biggest.With optimum output fiber length of 3 m the output power of 1063 nm laser was 270 mW and the corresponding slope efficiency was 21.5 %.The stable passive Q-switching function of the fiber laser was realized by using MoS2 as a saturable absorber.When the pump power changed in the range of 185~560 mW,a stable Q-switched pulse output was obtained.The maximum average output power of 2.18 mW and corresponding pulse width of 45 ns was obtained,repetition rate of 61.7 kHz,single pulse energy of 38 nJ were obtained respectively.Furthermore,pulse width,average output power and repetition rate presented approximate linear relationship with incident pump power.An unstable passive mode-locked sequence was also found in the experiment and reasonable theoretical explanations were given.
参考文献
相似文献
引证文献
引用本文
张凤娟,黄敏.二硫化钼掺镱光纤激光器连续和调Q实验研究[J].激光与红外,2021,51(2):178~183 ZHANG Feng-juan, HUANG Min. The experimental research of continuous and Q-switched MoS2-SA Yb3+-doped fiber laser[J]. LASER & INFRARED,2021,51(2):178~183