雪崩光电器件过剩噪声分析
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金项目(No.61874085)和陕西省博士后项目资助。


Excess noise analysis of avalanche photoelectric device
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    基于光子在雪崩光电器件内吸收位置的差异,提出过剩噪声因子在器件垂直方向的分布模型,并基于TCAD 和Matlab 仿真,验证了模型的有效性。模型考虑了光子在硅雪崩器件内不同吸收位置的过剩噪声因子,结合光子在器件深度方向的吸收比例,计算器件(器件结构由TCAD构造)的平均噪声因子水平:233 @ E=34×105 V/cm 和534 @ E=36×105 V/cm,比单独考虑光子在N中性体区吸收(过剩噪声因子:288 @ E=34×105 V/cm 和1294 @ E=36×105 V/cm)或P中性体区吸收(过剩噪声因子:221 @ E=34×105 V/cm 和379 @E=36×105 V/cm),更能反映器件的真实工作情况。

    Abstract:

    Based on the difference of the photon absorption positions in the avalanche optoelectronic device,a distribution model of the excess noise factor along the vertical direction of the device is proposed. The validity of the model is verified by the TCAD and Matlab simulation. The model considered the variable excess noise factor at the different photon absorption locations in the device,and combining the absorption ratio in the depth of the device to calculate the average noise factor level of the device(the device structure was built with TCAD):2.33 @ E=3.4×105 V/cm and 5.34 @ E=3.6×105 V/cm,which can better reflect the real working conditions of the device than considering the photon absorption in the N neutral region alone(excess noise factor:2.88 @ E=3.4×105 V/cm and 12.94 @ E=3.6×105 V/cm) or P neutral region alone(excess Noise factor:2.21 @ E=3.4×105 V/cm and 3.79 @ E=3.6×105 V/cm).

    参考文献
    相似文献
    引证文献
引用本文

张冰,郭雪凯,胡从振,辛有泽,于善哲,雷述宇.雪崩光电器件过剩噪声分析[J].激光与红外,2021,51(11):1472~1478
ZHANG Bing, GUO Xue-kai, HU Cong-zhen, XIN You-ze, YU Shan-zhe, LEI Shu-yu. Excess noise analysis of avalanche photoelectric device[J]. LASER & INFRARED,2021,51(11):1472~1478

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:2021-02-27
  • 录用日期:
  • 在线发布日期: 2021-11-24
  • 出版日期: