基于最小张角的红外双站多目标配准方法
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家十四五预研项目(No.514010405-207)资助。


Infrared multi target dual station registration method based on minimum angle
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了解决双站多目标配准方法中受各种误差影响使得配准精度降低的问题,提出了一种基于最小张角的配准方法。首先计算双站中所有测角线对应的张角矩阵,然后利用每个站的航迹信息缩量更新张角矩阵,最后基于最小张角和全局最优的原则选择最佳的数据关联组合。通过蒙特卡罗仿真方法,对算法的性能进行了评估,结果表明,算法不仅可以提高配准的精度,还可以大幅度减少运算的时间;目标之间距离30m时,关联的正确率大于97,算法的运行时间约0016ms,在精度和性能上均优于其他算法,为提高目标多维定位的精度提供了重要的理论基础。

    Abstract:

    In order to solve the problem of reduced registration accuracy due to various errors in the dual station multi target registration method,a minimum angle based registration method is proposed.Firstly,the angle matrices corresponding to all the angle measurement lines in the dual stations are calculated,then the angle matrices are updated by scaling the trajectory information of each station,and finally the optimal combination of data associations is selected based on the principles of minimum angle and global optimum.The capability of the algorithm is evaluated by Monte Carlo simulation method,and the results show that the algorithm can not only enhance the accuracy of registration,but also drastically reduce computation time.When the distance between targets is 30 m,the correct rate exceeds 97%,and the algorithm′s running time is approximately 0.016 ms.This algorithm outperforms other algorithms in terms of both accuracy and performance,providing an important theoretical foundation for improving the accuracy of multi dimensional target positioning.

    参考文献
    相似文献
    引证文献
引用本文

王霄,刘士建,李冰,裘莉娅.基于最小张角的红外双站多目标配准方法[J].激光与红外,2025,55(4):588~593
WANG Xiao, LIU Shi-Jian, LI Bing, QIU Li-Ya. Infrared multi target dual station registration method based on minimum angle[J]. LASER & INFRARED,2025,55(4):588~593

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2025-04-11
  • 出版日期: